top of page
05B-32-0515-D10-32A-0
Variable Frequency Drive Required
View Drive Options
Mounting Flange
IEC 90 B14
Enclosure
TENV w/Encoder
Rated Power HP
1.50
Rated Power Watts
1118
Rated Speed RPM
1800
Rated Freq. (Hz)
90
Number of Poles
6
Full Load Amps
6.0
Torque (in lb)
52.5
Power Factor
0.62
Efficiency (%)
87.6
2
Rotor Inertia (lb-in )
16.89
Back EMF L-L (V/k RPM)
64.3
Resistance L-L (ohms)
1.05
Inductance (Lsd)
4.4
Inductance (Lsq)
15.7
Peak Amps
14.90
Peak Torque (in lb)
140.60
Length (in)
9.54
User Manual
Coming Soon
Weight (lbs)
21.2
Motor Shaft Diameter (in)
0.95
Shaft Extension Length (in)
1.87
Drives
Bison Variable Frequency Drives
This motor requires a variable frequency drive that is designed to run permanent magnet synchronous 230/460 volt three phase AC motors. The following drives from Bison are compatible with this motor.
IP20 Drive
for in cabinet mounting
Part Number
Input Power
HP
Amps
DW40412
3 ~ 460 V
2
4.1
IP66 Drive
for exterior mounting
Part Number
Input Power
HP
Amps
DW40416
3 ~ 460 V
2
4.1
Power and Encoder Cables
This motor comes standard with an M17 power swivel connector. The following quick connect cables from Bison are available to link the motor and controller.
Power Cable
Part Number
Length
191-05B-0001
191-05B-0002
191-05B-0003
1 Meter
3 Meters
6 Meters
Encoder Cable
Part Number
Length
191-05B-1001
191-05B-1002
191-05B-1003
1 Meter
3 Meters
6 Meters
Custom cable lengths are available upon request. Contact the Bison Sales Team to learn more about this option.
bottom of page